What recreation centers involves

A public building has to stay open while the work happens. The work starts with finding out what is actually there. With recreation centers, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

You see the problem before you see a price. We point to what we found, explain why it matters and then tell you what fixing it takes. No pressure to approve on the spot.

Where this comes up

Municipal buildings, garages, libraries and community centers. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

A home sale is often when this surfaces. An inspector flags aluminum branch wiring, a fuse box or a panel with doubled-up breakers, and suddenly there is a deadline. We can tell you which items are urgent and which are only noted.

How we do it

We work like it is our own house. Drop cloths go down, the power stays off only as long as it has to, and the work is finished to code with the permit closed out where the village requires one.

Why this is worth doing properly

The wire in your wall has a rating, and so does the breaker protecting it. When the two do not match, the breaker stops protecting anything and the wire becomes the weak point. A lot of hidden electrical damage traces back to a mismatch like that, or to a connection that worked loose. Both are avoidable with careful work, which is why we take the time.

The cost of doing it right the first time is almost always lower than the cost of doing it twice. We would rather tell you the job is bigger than you hoped than come back in two years.

Scheduling and how long it takes

Call in the middle of the night with a dead panel and someone answers. Call on a Tuesday about adding outlets and you will likely see us within a few days, sooner if the schedule allows.

For a business that cannot lose power during open hours, the schedule bends around you. We can plan a shutdown for early morning, a weekend or after close, and we will tell you how long the power will actually be off.

Code, permits and inspection

Commercial and multi-unit work often needs drawings or a load calculation filed with the permit application. We prepare what the municipality asks for, so the permit is approved without a round of corrections and the inspection follows the plan that was filed.

We deal with whichever jurisdiction the job sits in. We pull the permit, we schedule the inspection, and we are there when the inspector walks it. You get the paperwork at the end, which matters when you sell the building or when an insurer asks.

Copper, aluminum and what is in your walls

Aluminum branch wiring went into a lot of houses in the late sixties and early seventies. It is not automatically dangerous, but it expands and contracts more than copper, which loosens terminations over time, and it needs devices and connectors rated for it.

The repair is usually not a full rewire. Proper connectors at every termination, done thoroughly, solves most of it. Anybody quoting you a whole-house rewire on sight has not looked.

What to do before we arrive

Whole house dark? Check whether the neighbors still have lights. If the street is out, that is a ComEd call, not ours. If it is only your building, leave the main off if you already shut it and wait for us.

Snap a photo of the panel, the outlet or whatever looks wrong. A picture plus a short history of the problem often tells us what to bring.