Electrical work in Capron

Our trucks are in Capron most weeks. We see a mix of residential calls and small commercial build-outs here.

One license, one standard. A job here gets the same electricians as a job in Des Plaines. We do not keep a separate crew for the jobs further out. You get a licensed electrician on site, every time.

What Capron calls us for

Panel capacity is the common thread. Once that is sorted the conversation usually turns to lighting or a charger, because those are the things people actually wanted when they called about the panel.

Local businesses call for lighting, equipment connections and build-out electrical on a schedule that cannot slip. We also cover municipal and school work across Boone County.

The buildings in Capron

Two-flats and small multi-unit buildings here bring their own issues, mostly around metering, separate services and making sure one unit's circuits are not feeding another's.

A full rewire is the expensive answer to aluminum branch wiring, and in most sixties and seventies houses it is the wrong one. The wire inside the walls is usually fine. What fails is the point where it meets a device, because aluminum moves more than copper. Fix those points properly and the house keeps its walls intact. We only talk about a rewire after we have opened the boxes and the condition calls for it.

Retail and restaurant tenants here need work done outside business hours, so we schedule around opening times rather than expecting them to close.

Weather, and what it does to wiring

Storm season drives most of the generator conversations locally. People buy backup power after the outage, not before it, which is why we keep transfer switch work moving in spring.

Permits in Capron

Inspection scheduling in Capron runs on the village calendar, which is usually what decides a completion date. We book it as early as the job allows.

How fast we get there

If you are not sure whether what you are seeing is urgent, call and describe it. We would rather talk you through it than have you wait on something that should not wait.

The service into a Capron property

When a storm pulls the service drop off an older overhead house, the repair has two owners. The mast, weatherhead and meter base on the house are ours to fix. The drop from the pole belongs to ComEd. We get our side done, and inspected where the village requires it, so the utility can reconnect as soon as they arrive.

Through the year

Summer is remodel season, which means circuit work: kitchens, baths, basements and additions all needing new runs and often a panel with room to take them. It is also when the schedule is tightest, so the earlier a job gets on the calendar the better the date you get.

Working at your address

One thing worth knowing: we will not start a job we cannot finish properly the same visit unless we have told you in advance that it is a two-day job. Leaving a property half-wired overnight is not something we do, and if the scope turns out bigger mid-job we stop and talk to you first.

What to do before we arrive

If there is a burning smell and you can safely reach the panel, shut off the affected circuit. If you cannot identify it, shut off the main. Do not run extension cords from another circuit as a workaround, especially for anything that heats.

Clear a path to the panel and the problem area. Then jot down anything that seems to set it off, like a certain appliance or time of day.

What happens when we are done

We test before we call it finished, every time. If something does not test right, we fix it while we are still there. Then the panel gets labeled, the scraps leave with us, and you get a clear account of the job.

Where a permit was pulled you get the closed inspection. Where documentation exists, you get it.