What athletic field lighting involves

Infrastructure electrical work happens outdoors, in the ground, and on a schedule nobody controls. The work starts with finding out what is actually there. With athletic field lighting, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

It starts with a look at the panel and the circuits involved. From there we tell you what has to be done, what can wait and what was never a problem at all.

Where this comes up

Street lighting, traffic signals, pump stations and underground distribution. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

Ungrounded two-wire circuits are still common, along with three-prong outlets installed on top of them with no ground behind the plate. The outlet looks right. The tester says otherwise, and that changes how the job is planned.

How we do it

Quik Wire Electric has 3 years in business and 10 years of electrical experience behind it. The work goes in to code, gets tested and comes with a 100% satisfaction guarantee.

Why this is worth doing properly

For a business, a shortcut in the electrical shows up as downtime. A circuit that trips during the busiest hour or a cooler that loses power overnight can cost more than the original job did. Getting the load calculation right and every connection tight at install is what prevents that, and it is the part of the work customers never see.

The cost of doing it right the first time is almost always lower than the cost of doing it twice. We would rather tell you the job is bigger than you hoped than come back in two years.

Scheduling and how long it takes

Small jobs often fit in this week. Bigger ones get a start date at the quote, with any permit or utility wait built in, so the date you are given is a date we can keep. Real emergencies come out same day.

Permit turnaround is not the same in every village. Some issue one quickly and others take longer, especially for anything bigger than a circuit. We know to ask, and we factor that wait into the date we give you.

What the permit actually buys you

A permit puts the work on the public record for the address. When the building changes hands, that record is evidence the electrical was done and checked. Without it, a buyer's inspector treats everything they find as suspect.

It also means the work was sized and installed to the code edition in force, not to whatever was normal when the building went up.

Copper, aluminum and what is in your walls

Aluminum branch wiring went into a lot of houses in the late sixties and early seventies. It is not automatically dangerous, but it expands and contracts more than copper, which loosens terminations over time, and it needs devices and connectors rated for it.

The repair is usually not a full rewire. Proper connectors at every termination, done thoroughly, solves most of it. Anybody quoting you a whole-house rewire on sight has not looked.

When to stop and call

Any time a device or the panel runs warm, buzzes or leaves a scorch mark, stop using that circuit. Leave it off and call us. We answer 24/7 for exactly this.

Smoke from an outlet, a fixture or the panel is not a wait-and-see problem. Kill power at the main if you can reach it safely, get out, and call the fire department first. Call us after, so the cause gets found and fixed.