What generator repair involves

Backup power is a system. The engine is the part people shop for and the least of the problem. The work starts with finding out what is actually there. With generator repair, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

The first step is finding out what is actually wrong. Sometimes it is one loose connection at a device, and the fix is an hour. We will tell you that plainly instead of selling a bigger job.

Where this comes up

Standby generators, automatic transfer switches and emergency power systems. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

Ungrounded two-wire circuits are still common, along with three-prong outlets installed on top of them with no ground behind the plate. The outlet looks right. The tester says otherwise, and that changes how the job is planned.

How we do it

Quik Wire Electric has 3 years in business and 10 years of electrical experience behind it. The work goes in to code, gets tested and comes with a 100% satisfaction guarantee.

What changes with an older building

Buildings in this part of Illinois cover about a century of wiring practice. Knob-and-tube in the oldest, cloth-insulated branch circuits after that, aluminum wiring in a stretch of the sixties and seventies, and modern copper since. Each one fails differently and each one has its own repair path.

We look at what is actually in the walls before quoting, because guessing from the year the house was built is how people end up with a surprise halfway through.

Who actually shows up

The person who shows up is a licensed electrician who works for us. No subcontracted crew you have never heard of. Small jobs get the same people as large ones, start to finish.

We give you a name and a time window when we book. Running behind happens, and when it does, you get a phone call about it.

Code, permits and inspection

Code is a minimum, written so that the next person in the wall finds something safe. We build to it on every job, and where a permit applies, the inspection proves it. The paperwork stays with the building, which matters most when you sell.

We deal with whichever jurisdiction the job sits in. We pull the permit, we schedule the inspection, and we are there when the inspector walks it. You get the paperwork at the end, which matters when you sell the building or when an insurer asks.

Materials and why they matter

Devices are not all the same. A fifty-cent backstabbed outlet holds the conductor with a spring clip; a commercial-grade one clamps it under a screw plate. The second kind is a couple of dollars more and it is the reason the connection is still tight in fifteen years.

We use commercial-grade devices as standard. It is a small share of the job cost and it is the part most likely to fail if you go cheap on it.

The warning signs people ignore

If you have started unplugging one thing to run another, the circuit is telling you it is overloaded. Same if a breaker trips in one season and never in the other. People work around these for years. We would rather see them early, while the fix is still a small one.

Getting used to it is the risk. A quirk you have lived with for a year is still a fault, only an older one.

The transfer switch is the system

People buy a generator and think of the engine as the product. The part that decides whether backup power actually works is the transfer switch, because it is what keeps generator power from backfeeding onto the utility line where it can kill a lineman.

Automatic switches sense the outage and start the unit without anybody being home. Manual switches cost less and need somebody present. Which one is right depends on what you are protecting.