What backup power involves

Public work runs on documentation as much as it runs on conduit. The work starts with finding out what is actually there. With backup power, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

Honest answer first. If what you have is fine, we say it is fine. If it needs work, we tell you how much and why, with the urgent parts separated from the ones that can wait.

Where this comes up

Village halls, fire stations, public works. Documented work on a public record. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

It comes up most during a remodel. The walls are open, the old wiring is right there, and it is the cheapest moment the building will ever give you to fix what is behind them. Once the drywall is back, the same repair costs more.

How we do it

Straight to the point: we find the problem, fix it to code and leave the space as clean as we found it. Anything that needs a permit gets one, and gets inspected.

What changes with an older building

Buildings in this part of Illinois cover about a century of wiring practice. Knob-and-tube in the oldest, cloth-insulated branch circuits after that, aluminum wiring in a stretch of the sixties and seventies, and modern copper since. Each one fails differently and each one has its own repair path.

We look at what is actually in the walls before quoting, because guessing from the year the house was built is how people end up with a surprise halfway through.

Who actually shows up

The owner spent years working for other electrical companies and built this one to do it better. That means licensed electricians on every call, no separate crew for little jobs, and no handing off the work nobody wants to do.

We keep the time we give you. When something on an earlier job runs over, we let you know as soon as we do, so you can plan around it.

The inspection is the point

An inspection is an independent check that what went behind the drywall matches what was supposed to. Work that passes has been verified by somebody with no stake in the invoice.

That is also why we would rather you hire a licensed contractor than the cheapest number you can find. Unpermitted electrical work is a problem you inherit, and it usually surfaces at the worst moment.

Grounding and bonding

Grounding is the part nobody sees and the part that decides whether a fault clears safely. The ground path has to be continuous and low-impedance from every device back to the service, and the neutral and ground can only be bonded together in one place.

A neutral bonded to ground in a subpanel is one of the most common defects we find. It works right up until it does not, and then it puts current on metal that people touch.

What to do before we arrive

If there is a burning smell and you can safely reach the panel, shut off the affected circuit. If you cannot identify it, shut off the main. Do not run extension cords from another circuit as a workaround, especially for anything that heats.

Think back to whether this has happened before and what changed recently, like a new appliance or some renovation work. That history narrows things down fast.