What HVAC electrical involves

School electrical work happens in the window between June and August, or it does not happen. The work starts with finding out what is actually there. With HVAC electrical, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

Where repair makes more sense than replacement, we repair. Swapping out equipment that still has years left in it is good business for a contractor and a bad deal for you.

Where this comes up

Summer-window work in classrooms, gyms, kitchens and athletic facilities. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

Older Illinois buildings rarely match the drawings, if there are drawings at all. Circuits wander between floors, junction boxes hide above ceilings, and a single breaker might feed a bedroom and half the kitchen. Tracing it properly is the first hour of a lot of jobs.

How we do it

The electrician who quotes the job comes from the same crew that does it. We work to the current code, test every circuit before we leave and label the panel so the next person can read it.

Why it usually cannot wait

Electrical problems do not stay the same size. A loose connection heats up, the heat oxidizes the metal, the oxidized metal raises the resistance, and the resistance makes more heat. That loop runs in one direction only and it ends at a scorched box.

If something is tripping, buzzing, warm to the touch or smells like hot plastic, that is the system telling you where the problem is while it is still cheap to fix.

How we quote it

Pricing a job means knowing what the service can carry, what shape the existing wiring is in and what the permit will require. None of that can be answered without somebody standing in front of the equipment.

The quote spells out what we will do, item by item, and what it costs. If we open up a box or a panel and find the job is different, we pause and walk you through it before any more work happens.

What the permit actually buys you

A permit puts the work on the public record for the address. When the building changes hands, that record is evidence the electrical was done and checked. Without it, a buyer's inspector treats everything they find as suspect.

It also means the work was sized and installed to the code edition in force, not to whatever was normal when the building went up.

Copper, aluminum and what is in your walls

Aluminum branch wiring went into a lot of houses in the late sixties and early seventies. It is not automatically dangerous, but it expands and contracts more than copper, which loosens terminations over time, and it needs devices and connectors rated for it.

The repair is usually not a full rewire. Proper connectors at every termination, done thoroughly, solves most of it. Anybody quoting you a whole-house rewire on sight has not looked.

What to do before we arrive

If water is anywhere near the panel or an outlet, do not touch either one. Stay out of the wet area, keep everyone back, and call us. A flooded basement with live circuits is a job for us, not for a pair of rubber boots.

Do not try to open the panel or take a device apart. Just tell us what you noticed and when, and we will take it from there.