What electrical service upgrades involves

Homeowners usually call us after something stops working twice. The work starts with finding out what is actually there. With electrical service upgrades, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

Honest answer first. If what you have is fine, we say it is fine. If it needs work, we tell you how much and why, with the urgent parts separated from the ones that can wait.

Where this comes up

Panels, rewires, outlets, lighting and the circuits behind everything in a house. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

It comes up most during a remodel. The walls are open, the old wiring is right there, and it is the cheapest moment the building will ever give you to fix what is behind them. Once the drywall is back, the same repair costs more.

How we do it

Quik Wire Electric has 3 years in business and 10 years of electrical experience behind it. The work goes in to code, gets tested and comes with a 100% satisfaction guarantee.

What changes with an older building

Buildings in this part of Illinois cover about a century of wiring practice. Knob-and-tube in the oldest, cloth-insulated branch circuits after that, aluminum wiring in a stretch of the sixties and seventies, and modern copper since. Each one fails differently and each one has its own repair path.

We look at what is actually in the walls before quoting, because guessing from the year the house was built is how people end up with a surprise halfway through.

Who actually shows up

The owner spent years working for other electrical companies and built this one to do it better. That means licensed electricians on every call, no separate crew for little jobs, and no handing off the work nobody wants to do.

We keep the time we give you. When something on an earlier job runs over, we let you know as soon as we do, so you can plan around it.

The inspection is the point

An inspection is an independent check that what went behind the drywall matches what was supposed to. Work that passes has been verified by somebody with no stake in the invoice.

That is also why we would rather you hire a licensed contractor than the cheapest number you can find. Unpermitted electrical work is a problem you inherit, and it usually surfaces at the worst moment.

Grounding and bonding

Grounding is the part nobody sees and the part that decides whether a fault clears safely. The ground path has to be continuous and low-impedance from every device back to the service, and the neutral and ground can only be bonded together in one place.

A neutral bonded to ground in a subpanel is one of the most common defects we find. It works right up until it does not, and then it puts current on metal that people touch.

The warning signs people ignore

A breaker you reset and forget about. A switch that crackles when you flip it. A light that flickers only when the dryer runs. People live with these for months because nothing seems broken yet. They are early warnings, and early is the cheap time to fix them.

Breakers that trip once in a while are not being fussy. Each trip is the breaker catching a real problem before the wire does.