What pool electrical systems involves

A house tells you when its electrical system is behind. The work starts with finding out what is actually there. With pool electrical systems, that means looking at the existing wiring, the panel capacity and whatever the last person left behind.

It starts with a look at the panel and the circuits involved. From there we tell you what has to be done, what can wait and what was never a problem at all.

Where this comes up

Panels, rewires, outlets, lighting and the circuits behind everything in a house. Most of these calls come from Des Plaines and the surrounding suburbs, but we take them anywhere in our service area.

It comes up most during a remodel. The walls are open, the old wiring is right there, and it is the cheapest moment the building will ever give you to fix what is behind them. Once the drywall is back, the same repair costs more.

How we do it

The electrician who quotes the job comes from the same crew that does it. We work to the current code, test every circuit before we leave and label the panel so the next person can read it.

Why it usually cannot wait

Electrical problems do not stay the same size. A loose connection heats up, the heat oxidizes the metal, the oxidized metal raises the resistance, and the resistance makes more heat. That loop runs in one direction only and it ends at a scorched box.

If something is tripping, buzzing, warm to the touch or smells like hot plastic, that is the system telling you where the problem is while it is still cheap to fix.

How we quote it

Pricing a job means knowing what the service can carry, what shape the existing wiring is in and what the permit will require. None of that can be answered without somebody standing in front of the equipment.

We keep quotes simple to read: each item, what it covers and its price. If something comes up on site that the quote did not cover, you hear about it from us before it becomes part of the bill.

Code, permits and inspection

Most permitted jobs have two inspections. The rough-in is checked with the walls open, before insulation and drywall. The final happens once devices are in and the power is on. Missing the rough-in means opening finished walls later, so we schedule around it from the start.

We deal with whichever jurisdiction the job sits in. We pull the permit, we schedule the inspection, and we are there when the inspector walks it. You get the paperwork at the end, which matters when you sell the building or when an insurer asks.

Copper, aluminum and what is in your walls

Aluminum branch wiring went into a lot of houses in the late sixties and early seventies. It is not automatically dangerous, but it expands and contracts more than copper, which loosens terminations over time, and it needs devices and connectors rated for it.

The repair is usually not a full rewire. Proper connectors at every termination, done thoroughly, solves most of it. Anybody quoting you a whole-house rewire on sight has not looked.

When to stop and call

Turn the circuit off and pick up the phone if a switch is hot, a receptacle has discolored, or there is a buzz you can trace to a device or the panel. Do not keep resetting and hoping.

Lights that brighten in one room while they dim in another point to a loose neutral, often at the service or the panel. That one can push high voltage into anything plugged in. Turn off sensitive equipment and call the same day.